reliability subsystem

英 [rɪˌlaɪə'bɪlɪti səbˈsɪstəm] 美 [rɪˌlaɪə'bɪləti ˈsʌbˌsɪstəm]

网络  可靠性子系统

计算机



双语例句

  1. Reliability Design of the Main Drive Subsystem in Press
    印刷机主传动子系统的可靠性设计
  2. Cascade Synthesis for Reliability of Pass/ Fail and Exponential Life Subsystem
    成败型与指数寿命型分系统可靠性的串联综合
  3. RAID ( Inexpensive Disk Redundancy Array) technology is an effective means to enhance performance and reliability of storage subsystem.
    RAID(廉价磁盘冗余阵列)技术是提高存储子系统性能和可靠性的一种有效手段。
  4. The posterior distribution of the reliability of the subsystem can be obtained using the system prior distribution,. The first moment and second moment of the system can be acquired by that of the subsystem.
    利用系统的后验分布确定各分系统的先验分布,再通过各分系统的一阶、二阶矩综合获得系统的一阶、二阶矩,在此基础上进行系统可靠性分析计算。
  5. On the basis of the definition of weapon system supportability, aircraft supportability si referred to the integration of reliability, maintainability and onboard support capability of aircraft itself and the support capability of aircraft's support subsystem.
    按照武器系统保障性的定义,飞机保障性指的是飞机本身的可靠性、维修性、机内自保障能力和飞机的保障分系统保障能力的综合。
  6. The Analysis of High Reliability Network Subsystem on the Linux OS
    基于Linux高可靠性网络子系统的分析
  7. The reliability evaluations of the subsystem are given using the Bayes method and the classical method respectively according to the various reliability distributions of the victory-vs-failure system estimate and index system estimate.
    根据系统成败型和指数型可靠性分布的不同,分别用贝叶斯法和经典法给出了分系统的可靠性估计。
  8. On the basis of method of assignment based on the system complexity factor, a method of engineering implementation is then used to solve for the degree of reliability for each subsystem under the condition that the whole system reliability is ensured.
    基于复杂因子的分配方法,在保证系统可靠性的前提下,给出了求解各子系统软件可靠度的工程实现方法。
  9. The method integrates the need ( reliability of system) with probability ( proportional quotiety) and presents a new approach to get the subsystem reliability index of equipment.
    该方法将需要(系统的可靠性指标)和可能(比例系数)结合起来,为装备可靠性指标的确定提供了一种新的方法。
  10. The fault modes, effects and criticality analysis ( FMECA) of a certain CNC lathe were analyzed, the fault cause was discussed, the product's weak link was found out, the reliability improvement suggestion for the parts or subsystem was put forward.
    对数控车床进行了故障模式、影响及危害度(FMECA)分析,剖析了数控车床的故障发生机理,找出了产品的薄弱环节,提出了部件或子系统的可靠性改进建议。
  11. We will introduce RAID technology and explore how to upgrade the performance and reliability of Disk subsystem.
    本文将介绍RAID技术,探讨如何利用RAID技术提高磁盘子系统的速度和可靠性。
  12. Structure and reliability design of digital subtraction angiography machine-electron subsystem
    数字减影血管造影系统机电分系统构成原理与可靠性设计
  13. The calculation problem of reliability design of disengaging and engaging mechanism subsystem in press is solved using the reliability theory of electronic component, and the direction of the reliability design of the electronic component in press is provided.
    运用电子元器件可靠性理论,解决了印刷机离合压机构子系统的可靠度计算问题,从而为印刷机电子元器件可靠性预测提供了方向。
  14. One case is to minimize the total sum of its construction cost and loss expectation under predetermined reliability of the parallel subsystem.
    一种情况是在给定总投入条件下使并联子系统失效概率最小,这是互为对偶的两个问题。
  15. How to upgrade the performance and reliability of computer s Disk subsystem
    如何提高计算机磁盘子系统的速度和可靠性
  16. Adopting ordinary suppose test and faintness identification, the multi_selected suppose distribution in the digital failure simulation of the subsystem was counted up and concluded, and a statistical model with high reliability of the subsystem was obtained.
    采用常规假设检验和模糊识别相结合的方法,对子系统故障数据统计分布的多个备择假设分布进行统计推断,使子系统寿命统计模型具有较高的可信度。
  17. The Reliability of the Railway Joint-Part Subsystem
    铁路结合部子系统的可靠性
  18. Results of the simulation demonstrate the reliability of the subsystem of the on-board computer real-time simulation environment and the effectiveness of the interface models of serial-port communication.
    仿真结果证明了星载计算机外部实时仿真环境子系统的可信性和串口通信接口模型的有效性。
  19. Third, FACADE design pattern was adopted for event interface to decrease complexity and enhance reliability in subsystem calls.
    利用FACADE设计模式实现了系统的事件处理接口,降低了子系统之间访问的复杂性,提高了访问的可靠性。
  20. First the paper presents a heterogeneous distributed computer system ( HDCS) architecture with security, high reliability and availability, then discusses the fuctions and composition of every subsystem.
    提出了一种具有安全性、高可靠性、高可用性的异构分布式计算机系统(HDCS)结构,讨论了HDCS各子系统的功能和组成。
  21. The system reliability statistical inferences are studied usually under the condition which subsystem distribution is known common type, or life data is completely known.
    对于复杂系统可靠性的统计推断方面的研究通常都是假定:子系统分布为已知常见类型,寿命数据是完全型的。
  22. Firstly, the parametric count analysis method and the calculating method of reliability, correct degree and availability of artificial subsystem are decided.
    建立了人为失误参数的统计分析方法和人为子系统的可靠度、改正度和有效度的计算方法。
  23. Moreover, reliability model of gun system has been established by use of the engineering theory of the reliability system on the basis of having analyzed the service life distribution rule of the subsystem of the key parts.
    根据对关键部件子系统寿命分布规律分析,运用可靠性系统工程学理论建立了火炮系统可靠性模型。
  24. This thesis focused on the reliability design and analysis for both the mechanical and electronic subsystem of the lift.
    本文对升降机系统及其机械和电子子系统做了可靠性设计和分析。
  25. When conducting subsystem reliability modeling, the subsystem was reclassified combining with laboratory research experience of many years, and the gray small sample GM ( 1,1) model was referred in order to improve accuracy first time at the same time.
    子系统可靠性建模,结合实验室多年的研究经验,对数控车床子系统进行重新划分,同时为提高建模的精度,首次采用适用于小样本的灰色GM(1,1)模型。
  26. Thirdly, the Markov method is brought forward to calculate the reliability of the material subsystem.
    提出了用马尔可夫方法计算施工材料设备子系统的可靠度。
  27. The distribution-interference theory is used to analyze the reliability of the gear which is the most important component of the mechanical subsystem.
    运用分布-干涉理论对升降机机械子系统中的重要部件齿轮进行了可靠性分析。
  28. The paper analyzes the computation principle and method of the reliability of Process Subsystem, and develops the Pyramid model which is used to compute the reliability of Construction System. ( 3) It is pointed out that the methods of computing the reliability of Process system.
    本文在分析施工过程子系统的可靠性计算原理和方法的基础上,构建了施工系统可靠度计算的金字塔模型。(3)提出了施工过程可靠度的确定方法。
  29. Drawing system similar RBD ( Reliability Block Diagram) module draw subsystem block diagram, describe the system redundancy strategy and draw automatically the system similar RBD in the user interface one by one.
    系统近似RBD(ReliabilityBlockDiagram)绘制模块在用户界面依次绘制功能子系统框图、描述系统冗余策略、自动绘制系统近似RBD。
  30. Aimed at easy integration, independent development of software, high reliability and stability, the scheme of subsystem program is presented based on services system.
    为便于各子系统集成与独立开发,提高系统的可靠性与稳定性,提出了基于服务的子系统程序结构方案。